Back to listings

Robotic chine bone saw trials show promise

17 November 2026
Robotic chine bone saw trials show promise

Trials involving a robot accurately taking the chine bone off a striploin have been successfully run in an Australian beef plant for the first time.

AMPC has joined forces with meat industry automated solutions company Frontmatec to test the innovative robotic chine bone saw (RCBS) technology and the results of the first trial are encouraging, with analysis now in full swing.

Removing the chine bone is a critical step in beef processing as it separates the spine from valuable meat cuts. The procedure directly affects product quality by enabling the precise separation of high-value portions such as striploin.

Due to the high price differential between the chine bone and the meat beneath it, this cut must be executed with extreme accuracy. Cutting too deeply results in unnecessary meat loss while cutting too shallowly increases deboning labour and cost.

The current art of removing the chine bone from beef striploins and ribs involves manual cutting using an industrial band saw.

It is a labour-intensive task with inherent safety hazards. It requires extensive training and can mean a person has to stand right next to a running blade.

Frontmatec's RCBS technology has a proven track record in the pork industry for removing chine bones, offering increased process speed and higher yield over the usual manual methods. The company has been developing it for beef and it has been successfully trialled in North American beef plants.

However, it had not been tested under Australian conditions and Australian product was quite different, AMPC Project Manager Advanced Manufacturing Koentadi Hadinoto said.

"Our striploins can have anywhere from 0 to 3 ribs while the US works to a 1-rib specification exclusively," Mr Hadinoto explained.

“Animals in Australia are a different size and different genetics are used, which means the technology needs to be adapted and validated.

"The trials we have been undertaking are run off the production line. The aim is to see whether the RCBS can meet Australian quality expectations and what changes it needs to get there.

"The team is also looking at whether the same approach could also work on beef ribs."

The RCBS has been tested at JBS Brooklyn with the Frontmatec team tuning the vision system, how the meat is held and the cut paths to suit Australian product.

Yield and Revenue Coordinator at JBS Australia James Luu said chine bone removal on the striploin was a small cut with a big impact on yield so JBS was keen to test it properly.

“In our end-to-end tests, where the robot-cut loins went through our normal boning and trimming to specification, striploin yield improved by around 0.3 percentage points of hot carcase weight on both grass-fed and grain-fed programs compared with our 12-month averages,” he said.

“The robot also cut more consistently from piece to piece than the manual band saw. These are early results from a short demonstration trial, and we are looking to confirm them with further testing.

“We thank Frontmatec and AMPC for the opportunity to trial the technology on our floor at Brooklyn.”

Once the results have been fully analysed, the technology will be checked at a second site, where the remaining cut specifications will be tested.

Global VP Products at Frontmatec Alexandre Lemieux said the aim was to demonstrate the operational performance of the beef RCBS in Australian production conditions, validating improved safety, reduced labour requirements, hygienic performance, cut consistency, quality and yield.

“Frontmatec’s initial estimated benefits are up to $6 per head savings and a payback period of below 18-month for mid-sized processors primarily driven through reduced labour and improved yield," Mr Lemieux said.

"This technology leverages the possibilities offered by modern robotics, industrial vision, automation and artificial intelligence to deliver a chine bone cutting solution that increases operator safety by moving workers away from the danger source at the same time as increasing consistency, cut quality and significantly increasing process yield.

"A successful outcome in these trials will lay the foundation for future initiatives to develop production-ready RCBSs suitable for production integration into Australian processing lines."

Previous in this focus area 25 September 2026 Lamb leg deboning machine for Australian processors on the way